Nero beschreibt keine DVD

Dieses Thema Nero beschreibt keine DVD im Forum "Audio, Video und Brennen" wurde erstellt von mg69, 16. Jan. 2006.

Thema: Nero beschreibt keine DVD Hallo, ich habe mir den DVD-RW Plextor 716A zugelegt. Mit Nero vers. 6.6 und 7.x kommt es beim Brennversuch einer...

  1. Hallo,

    ich habe mir den DVD-RW Plextor 716A zugelegt. Mit Nero vers. 6.6 und 7.x kommt es beim Brennversuch einer DVD zu einem Fehler.

    Vorweg noch ein anderes Problem: der Brenner und die benutzten CD-Rohlinge der Marke Phillips unterstützen beim beschreiben einer CD max.48x
    Jedoch kann ich eine CD nur mit 16x bis 24x beschreiben da ich sonst einen Buffer-Underrun bekommen, mit der Fehlermeldung, dass die Daten nicht schnell genug angeliefert werden konnten.
    Sehr seltsam finde ich, dass es zum Buffer-Unerrun kommt, da der Brenner Burn-Proof unterstützt und diese Funktion beim Brenner und in Nero aktiviert ist.
    -> Weiss jemand hierzu schon einen Rat?

    Kommen wir aber zu meinem eigentlichen Problem: das beschreiben einer DVD sollte laut Brenner mit 16x funktionieren und auch die getesteten DVD-Rohlinge der Marke Phillips und Verbatim unterstützen diese Schreibgeschwindigkeit.
    Nun habe ich mir eine Daten-DVD im ISO-Modus (UDF ebenfalls getestet) zusammengestellt und versuche diese zu brennen (alle Brenngeschwindigkeiten wurden schonm ausprobiert) und jedesmal erhalte ich folgende error-Log bzw. der Brennvorgang war nicht erfolgreich.

    Code:
    Windows XP 5.1
    IA32
    WinAspi: File->Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14
    ahead WinASPI: File->F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
    
    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4
    
    Recorder:       <PLEXTOR DVDR  PX-716A> Version: 1.09 - HA 1 TA 2 - 7.0.1.4
    Adapter driver:   <IDE>           HA 1
    Drive buffer :   8192kB
    Bus Type   :   default (0) -> ATAPI, detected: ?
    CD-ROM:        <Generic DVD-ROM     >Version: 1.0 - HA 1 TA 0 - 7.0.1.4
    Adapter driver:   <SCSI>          HA 1
    
    === Scsi-Device-Map ===
    DiskPeripheral    : WDC WD800JB-00CRA1   17.0   ultra Port 0 ID 0 DMA: Off
    DiskPeripheral    : SAMSUNG SP2014N     VC10   ultra Port 0 ID 2 DMA: Off
    CdRomPeripheral   : Generic DVD-ROM     1.0  d347prt Port 1 ID 0 DMA: Off
    CdRomPeripheral   : TOSHIBA DVD-ROM SD-M15021012  viadsk Port 2 ID 0 DMA: Off
    CdRomPeripheral   : PLEXTOR DVDR  PX-716A 1.09  viadsk Port 2 ID 1 DMA: Off
    DiskPeripheral    : IBM-DTTA-351010     T56O  viadsk Port 3 ID 0 DMA: Off
    
    === CDRom-Device-Map ===
    Generic DVD-ROM      D:  CDRom0
    TOSHIBA DVD-ROM SD-M1502  E:  CDRom1
    PLEXTOR DVDR  PX-716A   I:  CDRom2
    =======================
    
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE      : 0
    Physical memory   : 1535MB (1572316kB)
    Free physical memory: 1095MB (1121560kB)
    Memory in use    : 28 %
    Uncached PFiles: 0x0
    Use Inquiry  : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    
    15.1.2006
    ISO Zusammenstellung
    20:44:09  #1 Text 0 File Isodoc.cpp, Line 6411
      Iso document burn settings
      ------------------------------------------
      Determine maximum speed : FALSE
      Simulate        : FALSE
      Write          : TRUE
      Finalize CD       : TRUE
      Multisession      : FALSE
      Burning mode      : DAO
      Mode          : 1
      ISO Level        : 2 (Max. of 31 chars)
      Character set      : ISO 9660
      Joliet         : TRUE
      Allow pathdepth more than 8 directories : TRUE
      Allow more than 255 characters in path : TRUE
      Write ISO9660;1 file extensions    : TRUE
      
    20:44:09  #2 Text 0 File ThreadedTransfer.cpp, Line 525
      ReadBuffer-Pipe got 81920KB of Memory
      
    20:44:09  #3 Text 0 File Reader.cpp, Line 124
      Reader running
      
    20:44:09  #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
      First writeable address = 0 (0x00000000)
      
    20:44:09  #5 Text 0 File Burncd.cpp, Line 3342
      Turn on Disc-At-Once, using DVD media
      
    20:44:09  #6 Text 0 File DlgWaitCD.cpp, Line 279
      Last possible write address on media: 2298495 (510:46.45, 4489MB)
      Last address to be written:      2261471 (502:32.71, 4416MB)
      
    20:44:09  #7 Text 0 File DlgWaitCD.cpp, Line 291
      Write in overburning mode: NO (enabled: CD)
      
    20:44:09  #8 Text 0 File DlgWaitCD.cpp, Line 2578
      Recorder: PLEXTOR DVDR  PX-716A, Media type: DVD-R
       Disc Manufacturer: MCC 03 - RG20 
       Disc Application Code: 64, Disc Physical Code: 193
      
    20:44:09  #9 Text 0 File DlgWaitCD.cpp, Line 458
      >>> Protocol of DlgWaitCD activities: <<<
      =========================================
      
    20:44:09  #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
      Setup items (after recorder preparation)
       0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2261472 (2261472) = #2261472/502:32.72
        relocatable, disc pos for caching/writing not required/ required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2261472 blocks [I: PLEXTOR DVDR  PX-716A]
      --------------------------------------------------------------
      
    20:44:09  #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
      Prepare recorder [I: PLEXTOR DVDR  PX-716A] for write in CUE-sheet-DAO
      DAO infos:
      ==========
       MCN: 
       TOCType: 0x00; Session Closed, disc fixated
       Tracks 1 to 1:
        1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4631494656, ISRC 
      DAO layout:
      ===========
       __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
    ___
          0 | lead-in |  0 |  0x41 | 0x00
          0 |    1 |  0 |  0x41 | 0x00
          0 |    1 |  1 |  0x41 | 0x00
       2261472 | lead-out |  1 |  0x41 | 0x00
      
    20:44:09  #12 Text 0 File SCSIPassThrough.cpp, Line 36
      SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
      
    20:44:09  #13 Phase 24 File dlgbrnst.cpp, Line 1725
      Caching of files started
      
    20:44:09  #14 Text 0 File Burncd.cpp, Line 4176
      Cache writing successful.
      
    20:44:09  #15 Phase 25 File dlgbrnst.cpp, Line 1725
      Caching of files completed
      
    20:44:09  #16 Phase 36 File dlgbrnst.cpp, Line 1725
      Burn process started at 4x (5.540 KB/s)
      
    20:44:22  #17 Phase 38 File dlgbrnst.cpp, Line 1725
      Burn process failed at 4x (5.540 KB/s)
      
    
    Existing drivers:
    File->Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08
    File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
    File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)
    
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 
    
    wenn ich zuvor die optin maximale schreibgeschw. ermitteln und Simulation anklickeerhalte ich folgende error-Log:

    Code:
    Windows XP 5.1
    IA32
    WinAspi: File->Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14
    ahead WinASPI: File->F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
    
    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4
    
    Recorder:       <PLEXTOR DVDR  PX-716A> Version: 1.09 - HA 1 TA 2 - 7.0.1.4
    Adapter driver:   <IDE>           HA 1
    Drive buffer :   8192kB
    Bus Type   :   default (0) -> ATAPI, detected: ?
    CD-ROM:        <Generic DVD-ROM     >Version: 1.0 - HA 1 TA 0 - 7.0.1.4
    Adapter driver:   <SCSI>          HA 1
    
    === Scsi-Device-Map ===
    DiskPeripheral    : WDC WD800JB-00CRA1   17.0   ultra Port 0 ID 0 DMA: Off
    DiskPeripheral    : SAMSUNG SP2014N     VC10   ultra Port 0 ID 2 DMA: Off
    CdRomPeripheral   : Generic DVD-ROM     1.0  d347prt Port 1 ID 0 DMA: Off
    CdRomPeripheral   : TOSHIBA DVD-ROM SD-M15021012  viadsk Port 2 ID 0 DMA: Off
    CdRomPeripheral   : PLEXTOR DVDR  PX-716A 1.09  viadsk Port 2 ID 1 DMA: Off
    DiskPeripheral    : IBM-DTTA-351010     T56O  viadsk Port 3 ID 0 DMA: Off
    
    === CDRom-Device-Map ===
    Generic DVD-ROM      D:  CDRom0
    TOSHIBA DVD-ROM SD-M1502  E:  CDRom1
    PLEXTOR DVDR  PX-716A   I:  CDRom2
    =======================
    
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE      : 0
    Physical memory   : 1535MB (1572316kB)
    Free physical memory: 834MB (854520kB)
    Memory in use    : 45 %
    Uncached PFiles: 0x0
    Use Inquiry  : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    
    15.1.2006
    ISO Zusammenstellung
    20:47:36  #1 Text 0 File Isodoc.cpp, Line 6411
      Iso document burn settings
      ------------------------------------------
      Determine maximum speed : TRUE
      Simulate        : TRUE
      Write          : TRUE
      Finalize CD       : TRUE
      Multisession      : FALSE
      Burning mode      : DAO
      Mode          : 1
      ISO Level        : 2 (Max. of 31 chars)
      Character set      : ISO 9660
      Joliet         : TRUE
      Allow pathdepth more than 8 directories : TRUE
      Allow more than 255 characters in path : TRUE
      Write ISO9660;1 file extensions    : TRUE
      
    20:47:36  #2 Text 0 File ThreadedTransfer.cpp, Line 525
      ReadBuffer-Pipe got 262144KB of Memory
      
    20:47:36  #3 Text 0 File Reader.cpp, Line 124
      Reader running
      
    20:47:36  #4 Text 0 File Writer.cpp, Line 113
      Writer I: PLEXTOR DVDR  PX-716A running
      
    20:47:36  #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
      First writeable address = 0 (0x00000000)
      
    20:47:36  #6 Text 0 File Burncd.cpp, Line 3342
      Turn on Disc-At-Once, using DVD media
      
    20:47:36  #7 Text 0 File DlgWaitCD.cpp, Line 279
      Last possible write address on media: 2298495 (510:46.45, 4489MB)
      Last address to be written:      2190815 (486:50.65, 4278MB)
      
    20:47:36  #8 Text 0 File DlgWaitCD.cpp, Line 291
      Write in overburning mode: NO (enabled: CD)
      
    20:47:36  #9 Text 0 File DlgWaitCD.cpp, Line 2578
      Recorder: PLEXTOR DVDR  PX-716A, Media type: DVD-R
       Disc Manufacturer: MCC 03 - RG20 
       Disc Application Code: 64, Disc Physical Code: 193
      
    20:47:36  #10 Text 0 File DlgWaitCD.cpp, Line 458
      >>> Protocol of DlgWaitCD activities: <<<
      =========================================
      
    20:47:36  #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
      Setup items (after recorder preparation)
       0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2190816 (2190816) = #2190816/486:50.66
        relocatable, disc pos for caching/writing not required/ required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2190816 blocks [I: PLEXTOR DVDR  PX-716A]
      --------------------------------------------------------------
      
    20:47:36  #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
      Prepare recorder [I: PLEXTOR DVDR  PX-716A] for write in CUE-sheet-DAO
      DAO infos:
      ==========
       MCN: 
       TOCType: 0x00; Session Closed, disc fixated
       Tracks 1 to 1:
        1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4486791168, ISRC 
      DAO layout:
      ===========
       __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
    ___
          0 | lead-in |  0 |  0x41 | 0x00
          0 |    1 |  0 |  0x41 | 0x00
          0 |    1 |  1 |  0x41 | 0x00
       2190816 | lead-out |  1 |  0x41 | 0x00
      
    20:47:36  #13 Text 0 File SCSIPassThrough.cpp, Line 36
      SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
      
    20:47:36  #14 Phase 24 File dlgbrnst.cpp, Line 1725
      Caching of files started
      
    20:47:36  #15 Text 0 File Burncd.cpp, Line 4176
      Cache writing successful.
      
    20:47:36  #16 Phase 25 File dlgbrnst.cpp, Line 1725
      Caching of files completed
      
    20:47:36  #17 Phase 28 File dlgbrnst.cpp, Line 1725
      Speed measurement started
      
    20:47:36  #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
      Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
      
    20:50:08  #19 Text 0 File WriterStatus.cpp, Line 116
      <I: PLEXTOR DVDR  PX-716A> start writing Lead-Out at LBA 2190816 (216DE0h), length 0 blocks
      
    20:50:08  #20 Text 0 File ThreadedTransfer.cpp, Line 228
      all writers idle, stopping conversion
      
    20:50:08  #21 Phase 29 File dlgbrnst.cpp, Line 1674
      Speed measurement completed: 22x (30.372 KB/s)
      
    20:50:08  #22 Phase 32 File dlgbrnst.cpp, Line 1725
      Simulation started at 8x (11.080 KB/s)
      
    20:50:47  #23 Phase 34 File dlgbrnst.cpp, Line 1725
      Simulation failed at 8x (11.080 KB/s)
      
    
    Existing drivers:
    File->Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08
    File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
    File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)
    
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    
    einen Defekt des Brenners schließe ich aus, da ich schon den dvd-brenner benq 1640 an meinem system getestet habe und hier kam es zu den gleichen Fehlern.

    Weiss jemand einen Rat?

    P.S. ich habe gehört, dass es mit den Aspi v 4.71 Probleme geben kann/soll habe darum auch die v.4.6 getestet mit dem selben ergebnis.

    Seltsam ist auch warum Nero ausgibt, das alle DMA-Kanaäle aus sind dabei sind sie bei jeder Plate ON!

    Vielen Dank im Voraus!
     
  2. Nachtrag:

    Ich habe mal versucht eine Zusammenstellung mit NeroExpress zu brennen dabei kam eine fast gleiche Fehlermeldung lediglich mit dem Zusatz, dass der Buffer meines Plextor-Brenners zu groß! sei?! ???
     
  3. So nun habe ich sämtliche ASPI-Treiber von meinem System entfernt - der Fehler bleibt bestehen. Dann habe ich aus dem Nero Core Verzeichnis Core\Wnaspi32.dll': Ver=2.0.1.74, die aspi Datei entfernt - der Fehler bleibt weiterhin bestehen - die error-log in der nicht viel anderes steht enthalte ich euch aber nicht vor :)

    Code:
    Windows XP 5.1
    IA32
    WinAspi: -
    
    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4
    
    Recorder:       <PLEXTOR DVDR  PX-716A> Version: 1.09 - HA 1 TA 2 - 7.0.1.4
     Adapter driver:   <IDE>           HA 1
     Drive buffer :   8192kB
     Bus Type   :   default (0) -> ATAPI, detected: ?
    CD-ROM:        <Generic DVD-ROM     >Version: 1.0 - HA 1 TA 0 - 7.0.1.4
     Adapter driver:   <SCSI>          HA 1
    
    === Scsi-Device-Map ===
    DiskPeripheral    : WDC WD800JB-00CRA1   17.0   ultra Port 0 ID 0 DMA: Off
    DiskPeripheral    : SAMSUNG SP2014N     VC10   ultra Port 0 ID 2 DMA: Off
    CdRomPeripheral   : Generic DVD-ROM     1.0  d347prt Port 1 ID 0 DMA: Off
    CdRomPeripheral   : TOSHIBA DVD-ROM SD-M15021012  viadsk Port 2 ID 0 DMA: Off
    CdRomPeripheral   : PLEXTOR DVDR  PX-716A 1.09  viadsk Port 2 ID 1 DMA: Off
    DiskPeripheral    : IBM-DTTA-351010     T56O  viadsk Port 3 ID 0 DMA: Off
    
    === CDRom-Device-Map ===
    Generic DVD-ROM      D:  CDRom0
    TOSHIBA DVD-ROM SD-M1502  E:  CDRom1
    PLEXTOR DVDR  PX-716A   I:  CDRom2
    =======================
    
    AutoRun : 1
    Excluded drive IDs: 
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 1
    BUFE      : 0
    Physical memory   : 1535MB (1572316kB)
    Free physical memory: 1093MB (1119240kB)
    Memory in use    : 28 %
    Uncached PFiles: 0x0
    Use Inquiry  : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0) 
    
    16.1.2006
    ISO Zusammenstellung
    18:47:57	#1 Text 0 File Isodoc.cpp, Line 6411
    	Iso document burn settings
    	------------------------------------------
    	Determine maximum speed : FALSE
    	Simulate        : FALSE
    	Write          : TRUE
    	Finalize CD       : TRUE
    	Multisession      : FALSE
    	Burning mode      : DAO
    	Mode          : 1
    	ISO Level        : 2 (Max. of 31 chars)
    	Character set      : ISO 9660
    	Joliet         : TRUE
    	Allow pathdepth more than 8 directories : TRUE
    	Allow more than 255 characters in path : TRUE
    	Write ISO9660 ;1 file extensions    : TRUE
    	
    18:47:57	#2 Text 0 File ThreadedTransfer.cpp, Line 525
    	ReadBuffer-Pipe got 262144KB of Memory
    	
    18:47:57	#3 Text 0 File Reader.cpp, Line 124
    	Reader running
    	
    18:47:57	#4 ISO9660GEN -11 File Geniso.cpp, Line 3312
    	First writeable address = 0 (0x00000000)
    	
    18:47:57	#5 Text 0 File Burncd.cpp, Line 3342
    	Turn on Disc-At-Once, using DVD media
    	
    18:47:58	#6 Text 0 File DlgWaitCD.cpp, Line 279
    	Last possible write address on media: 2298495 (510:46.45, 4489MB)
    	Last address to be written:      2285759 (507:56.59, 4464MB)
    	
    18:47:58	#7 Text 0 File DlgWaitCD.cpp, Line 291
    	Write in overburning mode: NO (enabled: CD)
    	
    18:47:58	#8 Text 0 File DlgWaitCD.cpp, Line 2578
    	Recorder: PLEXTOR DVDR  PX-716A, Media type: DVD-R
    	 Disc Manufacturer: MCC 03 - RG20 
    	 Disc Application Code: 64, Disc Physical Code: 193
    	
    18:47:58	#9 Text 0 File DlgWaitCD.cpp, Line 458
    	>>> Protocol of DlgWaitCD activities: <<<
    	=========================================
    	
    18:47:58	#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    	Setup items (after recorder preparation)
    	 0: TRM_DATA_MODE1 ()
    	  2 indices, index0 (150) not provided
    	  original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
    	  relocatable, disc pos for caching/writing not required/ required, no patch infos
    	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [I: PLEXTOR DVDR  PX-716A]
    	--------------------------------------------------------------
    	
    18:47:58	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    	Prepare recorder [I: PLEXTOR DVDR  PX-716A] for write in CUE-sheet-DAO
    	DAO infos:
    	==========
    	 MCN: 
    	 TOCType: 0x00; Session Closed, disc fixated
    	 Tracks 1 to 1:
    	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4681236480, ISRC 
    	DAO layout:
    	===========
    	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    	    0 | lead-in |  0 |  0x41 | 0x00
    	    0 |    1 |  0 |  0x41 | 0x00
    	    0 |    1 |  1 |  0x41 | 0x00
    	 2285760 | lead-out |  1 |  0x41 | 0x00
    	
    18:47:58	#12 Text 0 File SCSIPassThrough.cpp, Line 36
    	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    	
    18:47:58	#13 Phase 24 File dlgbrnst.cpp, Line 1725
    	Caching of files started
    	
    18:47:58	#14 Text 0 File Burncd.cpp, Line 4176
    	Cache writing successful.
    	
    18:47:58	#15 Phase 25 File dlgbrnst.cpp, Line 1725
    	Caching of files completed
    	
    18:47:58	#16 Phase 36 File dlgbrnst.cpp, Line 1725
    	Burn process started at 16x (22.160 KB/s)
    	
    18:49:03	#17 Phase 38 File dlgbrnst.cpp, Line 1725
    	Burn process failed at 16x (22.160 KB/s)
    	
    
    Existing drivers:
    File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
    File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)
    
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 
    
    Wenn ich mit dem AVS Disc Creator eine DVD beschreiben will, so bekomme ich nach dem Cachen der Dateien und starten des Brennvorgangs die Fehlermeldung Error write buffer sectors

    jemand noch eine idee?
     
  4. Alles wieder i.O.! :)

    nach dem ich die via hyperion Treiber (v.504) deinstalliert habe können nun auch DVDs beschrieben werden!
    -> zudem wird der DMA Modus / bzw. zu verwendete Treiber und Controller richtig ausgegeben.

    Hier die log eines erfolgreichen DVD-beschreibens:

    Code:
    Windows XP 5.1
    IA32
    WinAspi: File->Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 13.09.2001 09:51:38 
    
    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4
    
    Recorder:       <PLEXTOR DVDR  PX-716A> Version: 1.09 - HA 1 TA 1 - 7.0.1.4
     Adapter driver:   <IDE>           HA 1
     Drive buffer :   8192kB
     Bus Type   :   default (0) -> ATAPI, detected: ?
    CD-ROM:        <TOSHIBA DVD-ROM SD-M1502>Version: 1012 - HA 1 TA 0 - 7.0.1.4
     Adapter driver:   <IDE>           HA 1
    
    === Scsi-Device-Map ===
    CdRomPeripheral   : TOSHIBA DVD-ROM SD-M1502     atapi Port 0 ID 0 DMA: On 
    CdRomPeripheral   : PLEXTOR DVDR  PX-716A      atapi Port 0 ID 1 DMA: On 
    DiskPeripheral    : IBM-DTTA-351010         atapi Port 1 ID 0 DMA: On 
    DiskPeripheral    : WDC WD800JB-00CRA1   17.0   ultra Port 2 ID 0 DMA: Off
    DiskPeripheral    : SAMSUNG SP2014N     VC10   ultra Port 2 ID 2 DMA: Off
    CdRomPeripheral   : Generic DVD-ROM     1.0  d347prt Port 3 ID 0 DMA: Off
    
    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1502  D:  CDRom0
    PLEXTOR DVDR  PX-716A   E:  CDRom1
    Generic DVD-ROM      I:  CDRom2
    =======================
    
    AutoRun : 1
    Excluded drive IDs: 
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 1
    BUFE      : 0
    Physical memory   : 1535MB (1572316kB)
    Free physical memory: 834MB (854020kB)
    Memory in use    : 45 %
    Uncached PFiles: 0x0
    Use Inquiry  : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0) 
    
    19.1.2006
    ISO Zusammenstellung
    13:21:26	#1 Text 0 File Isodoc.cpp, Line 6411
    	Iso document burn settings
    	------------------------------------------
    	Determine maximum speed : FALSE
    	Simulate        : FALSE
    	Write          : TRUE
    	Finalize CD       : TRUE
    	Multisession      : FALSE
    	Burning mode      : DAO
    	Mode          : 1
    	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
    	Character set      : ISO 9660
    	Joliet         : TRUE
    	Allow pathdepth more than 8 directories : TRUE
    	Allow more than 255 characters in path : TRUE
    	Write ISO9660 ;1 file extensions    : TRUE
    	
    13:21:26	#2 Text 0 File ThreadedTransfer.cpp, Line 525
    	ReadBuffer-Pipe got 262144KB of Memory
    	
    13:21:26	#3 Text 0 File Reader.cpp, Line 124
    	Reader running
    	
    13:21:26	#4 Text 0 File Writer.cpp, Line 113
    	Writer E: PLEXTOR DVDR  PX-716A running
    	
    13:21:26	#5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    	First writeable address = 0 (0x00000000)
    	
    13:21:26	#6 Text 0 File Burncd.cpp, Line 3342
    	Turn on Disc-At-Once, using DVD media
    	
    13:21:26	#7 Text 0 File DlgWaitCD.cpp, Line 279
    	Last possible write address on media: 2298495 (510:46.45, 4489MB)
    	Last address to be written:      2242095 (498:14.45, 4379MB)
    	
    13:21:26	#8 Text 0 File DlgWaitCD.cpp, Line 291
    	Write in overburning mode: NO (enabled: CD)
    	
    13:21:26	#9 Text 0 File DlgWaitCD.cpp, Line 2578
    	Recorder: PLEXTOR DVDR  PX-716A, Media type: DVD-R
    	 Disc Manufacturer: MCC 03 - RG20 
    	 Disc Application Code: 64, Disc Physical Code: 193
    	
    13:21:26	#10 Text 0 File DlgWaitCD.cpp, Line 458
    	>>> Protocol of DlgWaitCD activities: <<<
    	=========================================
    	
    13:21:26	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    	Setup items (after recorder preparation)
    	 0: TRM_DATA_MODE1 ()
    	  2 indices, index0 (150) not provided
    	  original disc pos #0 + 2242096 (2242096) = #2242096/498:14.46
    	  relocatable, disc pos for caching/writing not required/ required, no patch infos
    	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2242096 blocks [E: PLEXTOR DVDR  PX-716A]
    	--------------------------------------------------------------
    	
    13:21:26	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    	Prepare recorder [E: PLEXTOR DVDR  PX-716A] for write in CUE-sheet-DAO
    	DAO infos:
    	==========
    	 MCN: 
    	 TOCType: 0x00; Session Closed, disc fixated
    	 Tracks 1 to 1:
    	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4591812608, ISRC 
    	DAO layout:
    	===========
    	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    	    0 | lead-in |  0 |  0x41 | 0x00
    	    0 |    1 |  0 |  0x41 | 0x00
    	    0 |    1 |  1 |  0x41 | 0x00
    	 2242096 | lead-out |  1 |  0x41 | 0x00
    	
    13:21:26	#13 Text 0 File SCSIPassThrough.cpp, Line 36
    	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    	
    13:21:26	#14 Phase 24 File dlgbrnst.cpp, Line 1725
    	Caching of files started
    	
    13:21:27	#15 Text 0 File Burncd.cpp, Line 4176
    	Cache writing successful.
    	
    13:21:27	#16 Phase 25 File dlgbrnst.cpp, Line 1725
    	Caching of files completed
    	
    13:21:27	#17 Phase 36 File dlgbrnst.cpp, Line 1725
    	Burn process started at 16x (22.160 KB/s)
    	
    13:21:27	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    	
    13:21:27	#19 Text 0 File DVDR.cpp, Line 2580
    	Recording mode: Sequential Recording Mode
    	
    13:21:27	#20 Text 0 File MMC.cpp, Line 21611
    	Set BUFE: BURN-Proof -> ON 
    	
    13:21:27	#21 Text 0 File DVDR.cpp, Line 2735
    	Start write address at LBA 0
    	DVD high compatibility mode: Yes
    	
    13:21:27	#22 Text 0 File Cdrdrv.cpp, Line 8411
    	---- DVD Structure: Physical Format Information (00h) ----
    	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
    	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
    	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
    	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    	 End Physical Sector Number of Data Area:   26127F h
    	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
    	 Data in Burst Cutting Area (BCA) does not exist
    	 Start sector number of the current Border-Out: 0 h
    	 Start sector number of the next Border-In:   0 h
    	 Media Specific [16..63]:
    	   00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00  .`...0@P...!....
    	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
    	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
    	
    13:21:33	#23 Text 0 File Cdrdrv.cpp, Line 1197
    	13:21:33.973 - E: PLEXTOR DVDR  PX-716A : Queue again later
    	
    13:28:57	#24 Text 0 File WriterStatus.cpp, Line 116
    	<E: PLEXTOR DVDR  PX-716A> start writing Lead-Out at LBA 2242096 (223630h), length 0 blocks
    	
    13:28:57	#25 Text 0 File ThreadedTransfer.cpp, Line 228
    	all writers idle, stopping conversion
    	
    13:28:57	#26 Text 0 File DVDR.cpp, Line 2978
    	EndDAO: Last written address was 2242095
    	
    13:29:15	#27 Phase 37 File dlgbrnst.cpp, Line 1725
    	Burn process completed successfully at 16x (22.160 KB/s)
    	
    
    Existing drivers:
    File->Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 13.09.2001 09:51:32 
    File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
    
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 
    
     
Die Seite wird geladen...

Nero beschreibt keine DVD - Ähnliche Themen

Forum Datum
Nero BackItUp2 Windows 7 Forum 27. Juni 2015
Ahead Software bzgl. Nero startet automatisch beim Systemstart Software: Empfehlungen, Gesuche & Problemlösungen 30. Jan. 2015
Nero 9 Windows XP Forum 9. Juni 2013
Nero 9.4.12.708b Lite - Kostenloses Brennprogramm Windows XP Forum 30. März 2010
ordneroptionen -> auswählen von elementen klappt nicht Windows XP Forum 26. Juli 2009