oh je ich hoffe mal nicht das es die festplatte ist. hier die logs:
Complete selective self-test log:
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
und
smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-win7(64)] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-22A23T0
Serial Number: WD-WX91A70A9039
LU WWN Device Id: 5 0014ee 600592172
Firmware Version: 01.01A01
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Oct 26 10:11:49 2011 MN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 95) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 196 196 047 Pre-fail Always - 21770
3 Spin_Up_Time 0x0027 153 127 039 Pre-fail Always - 1325
4 Start_Stop_Count 0x0032 089 089 050 Old_age Always - 11358
5 Reallocated_Sector_Ct 0x0033 200 200 051 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 046 Old_age Always - 0
9 Power_On_Hours 0x0032 098 098 050 Old_age Always - 1530
10 Spin_Retry_Count 0x0032 100 100 050 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 050 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 696
191 G-Sense_Error_Rate 0x0032 001 001 050 Old_age Always FAILING_NOW 353
192 Power-Off_Retract_Count 0x0032 200 200 050 Old_age Always - 33
193 Load_Cycle_Count 0x0032 171 171 050 Old_age Always - 88939
194 Temperature_Celsius 0x0022 106 089 034 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 050 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 198 050 Old_age Always - 47
198 Offline_Uncorrectable 0x0030 100 253 048 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 050 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 008 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 1530 27476561
# 2 Short offline Completed: read failure 90% 1530 27476561
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
und
smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-win7(64)] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-22A23T0
Serial Number: WD-WX91A70A9039
LU WWN Device Id: 5 0014ee 600592172
Firmware Version: 01.01A01
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Oct 26 10:11:49 2011 MN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 95) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 196 196 047 Pre-fail Always - 21770
3 Spin_Up_Time 0x0027 153 127 039 Pre-fail Always - 1325
4 Start_Stop_Count 0x0032 089 089 050 Old_age Always - 11358
5 Reallocated_Sector_Ct 0x0033 200 200 051 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 046 Old_age Always - 0
9 Power_On_Hours 0x0032 098 098 050 Old_age Always - 1530
10 Spin_Retry_Count 0x0032 100 100 050 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 050 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 696
191 G-Sense_Error_Rate 0x0032 001 001 050 Old_age Always FAILING_NOW 353
192 Power-Off_Retract_Count 0x0032 200 200 050 Old_age Always - 33
193 Load_Cycle_Count 0x0032 171 171 050 Old_age Always - 88939
194 Temperature_Celsius 0x0022 106 089 034 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 050 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 198 050 Old_age Always - 47
198 Offline_Uncorrectable 0x0030 100 253 048 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 050 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 008 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 1530 27476561
# 2 Short offline Completed: read failure 90% 1530 27476561
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
übrigens habe ich noch vergessen zu erwähnen das auch nach dem starten öfter eine andere grafikeinstellung war als vorher und der ruhezustand und der energie-spar-modus ist auch nicht mehr verfügbar...
danke