BTC DVDRW IDE 1004 defekt? Brauch Hilfe Bitte

  • #1
B

Blood_in_the_rain

Bekanntes Mitglied
Themenersteller
Dabei seit
29.05.2002
Beiträge
145
Reaktionspunkte
0
Ort
Da wo's kein DSL gibt
Hallo liebe WT Community
hab ein Problem mit meinem Brenner. Und zwar seit 2 Wochen schaftt ers nicht mehr DVD zu brennen. Entweder er scheitert beim Lead in oder beim Lead out. Da ich mich nicht besonders mit der Materie aus kenne und nicht weis an was das leigen könnte schreib ich hier den Nero Log sowohl als er noch lief, sowie danach oben 2.01.06 lief noch
unten heute.
schon 5 DVD Rohlinge vebrannt. Bitte helft mir oder sagt mir ob ich nen neuen Brenner kaufen muss:
Code: 
Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 614MB (629620kB)
Memory in use    : 39 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

2.1.2006
UDF Zusammenstellung
13:02:36	#1 Text 0 File WriterStatus.cpp, Line 116
	<H: DVDRW IDE1004> start writing Lead-Out at LBA 2272752 (22ADF0h), length 0 blocks
	
13:02:37	#2 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
13:02:37	#3 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 2272751
	
13:03:15	#4 Phase 37 File dlgbrnst.cpp, Line 1724
	Burn process completed successfully at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======



Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 598MB (612772kB)
Memory in use    : 41 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

2.1.2006
ISO Zusammenstellung
13:57:56	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate        : FALSE
	Write          : TRUE
	Finalize CD       : TRUE
	Multisession      : FALSE
	Burning mode      : DAO
	Mode          : 1
	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
	Character set      : ISO 9660
	Joliet         : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : FALSE
	Write ISO9660 ;1 file extensions    : TRUE
	
13:57:56	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
13:57:56	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
13:57:56	#4 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
13:57:56	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
13:57:56	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
13:57:59	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written:      2215791 (492:23.66, 4327MB)
	
13:57:59	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
13:57:59	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004, Media type: DVD-R
	 Disc Manufacturer: SKC Co - .,Ltd.
	 Disc Application Code: 64, Disc Physical Code: 193
	
13:57:59	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
13:57:59	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2215792 (2215792) = #2215792/492:23.67
	  relocatable, disc pos for caching/writing not required/ required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2215792 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
13:58:00	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4537942016, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2215792 | lead-out |  1 |  0x41 | 0x00
	
13:58:00	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
13:58:00	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
13:58:00	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
13:58:00	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
13:58:01	#17 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 4x (5.540 KB/s)
	
13:58:01	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
13:58:02	#19 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
	
13:58:02	#20 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Super Link -> ON 
	
13:58:02	#21 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
13:58:02	#22 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:   0 h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In:   0 h
	 Media Specific [16..63]:
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	
13:58:13	#23 Text 0 File Cdrdrv.cpp, Line 1195
	13:58:13.250 - H: DVDRW IDE1004 : Queue again later
	
14:25:32	#24 Text 0 File WriterStatus.cpp, Line 116
	<H: DVDRW IDE1004> start writing Lead-Out at LBA 2215792 (21CF70h), length 0 blocks
	
14:25:32	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
14:25:32	#26 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 2215791
	
14:26:10	#27 Phase 37 File dlgbrnst.cpp, Line 1724
	Burn process completed successfully at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======



Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 425MB (436048kB)
Memory in use    : 58 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

3.1.2006
ISO Zusammenstellung
20:38:51	#1 Text 0 File WriterStatus.cpp, Line 116
	<H: DVDRW IDE1004> start writing Lead-Out at LBA 2219056 (21DC30h), length 0 blocks
	
20:38:51	#2 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
20:38:51	#3 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 2219055
	
20:39:33	#4 Phase 37 File dlgbrnst.cpp, Line 1724
	Burn process completed successfully at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======


Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 442MB (453092kB)
Memory in use    : 56 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

6.1.2006
ISO Zusammenstellung
22:42:08	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate        : FALSE
	Write          : TRUE
	Finalize CD       : TRUE
	Multisession      : FALSE
	Burning mode      : DAO
	Mode          : 1
	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
	Character set      : ISO 9660
	Joliet         : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : FALSE
	Write ISO9660 ;1 file extensions    : TRUE
	
22:42:08	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
22:42:08	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
22:42:08	#4 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
22:42:08	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
22:42:08	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
22:42:11	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written:      2288863 (508:38.13, 4470MB)
	
22:42:11	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
22:42:11	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004, Media type: DVD-R
	 Disc Manufacturer: SKC Co - .,Ltd.
	 Disc Application Code: 64, Disc Physical Code: 193
	
22:42:11	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
22:42:11	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2288864 (2288864) = #2288864/508:38.14
	  relocatable, disc pos for caching/writing not required/ required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288864 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
22:42:11	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4687593472, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2288864 | lead-out |  1 |  0x41 | 0x00
	
22:42:11	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
22:42:11	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
22:42:12	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
22:42:12	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
22:42:12	#17 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 4x (5.540 KB/s)
	
22:42:12	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
22:42:13	#19 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
	
22:42:13	#20 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Super Link -> ON 
	
22:42:13	#21 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
 
  • #2
Code: 
22:42:13	#22 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:   0 h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In:   0 h
	 Media Specific [16..63]:
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	
22:42:31	#23 Text 0 File Cdrdrv.cpp, Line 1195
	22:42:31.187 - H: DVDRW IDE1004 : Queue again later
	
22:45:27	#24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:  0x2A 00 00 00 02 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x04100000: Len x10000
	0x3E 2F FF 7E 2E FA 95 53 65 55 56 68 40 8B B3 3A 
	0x64 15 D4 E8 0A 88 59 70 36 8F B5 44 2F 2E A9 87 
	0xAA AF E2 59 3E 7D 50 1E 06 64 BE 0F 44 AF 74 78 
	
22:45:27	#25 CDR -1135 File Writer.cpp, Line 302
	Write error
	H: DVDRW IDE1004
	
22:45:27	#26 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
22:45:27	#27 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
22:45:28	#28 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 511
	
22:45:28	#29 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======


Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 613MB (627756kB)
Memory in use    : 40 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

6.1.2006
ISO Zusammenstellung
22:57:44	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate        : FALSE
	Write          : TRUE
	Finalize CD       : TRUE
	Multisession      : FALSE
	Burning mode      : DAO
	Mode          : 1
	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
	Character set      : ISO 9660
	Joliet         : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : FALSE
	Write ISO9660 ;1 file extensions    : TRUE
	
22:57:44	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
22:57:44	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
22:57:44	#4 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
22:57:44	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
22:57:44	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
22:58:29	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written:      2288863 (508:38.13, 4470MB)
	
22:58:29	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
22:58:29	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004, Media type: DVD-R
	 Disc Manufacturer: SKC Co - .,Ltd.
	 Disc Application Code: 64, Disc Physical Code: 193
	
22:58:29	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unbekannt. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
	
22:58:29	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2288864 (2288864) = #2288864/508:38.14
	  relocatable, disc pos for caching/writing not required/ required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288864 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
22:58:30	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4687593472, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2288864 | lead-out |  1 |  0x41 | 0x00
	
22:58:30	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
22:58:30	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
22:58:30	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
22:58:30	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
22:58:30	#17 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 4x (5.540 KB/s)
	
22:58:30	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
22:58:31	#19 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
	
22:58:31	#20 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Super Link -> ON 
	
22:58:31	#21 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
22:58:31	#22 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:   0 h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In:   0 h
	 Media Specific [16..63]:
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	
22:58:53	#23 SPTI -1106 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:  0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03 
	Buffer x04040000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
22:58:53	#24 CDR -1106 File Writer.cpp, Line 302
	Power calibration error
	H: DVDRW IDE1004
	
22:58:53	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
22:58:53	#26 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
22:58:53	#27 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was -1
	
22:58:53	#28 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======


Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================
 
  • #3
Code: 
AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 180MB (184808kB)
Memory in use    : 82 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

6.1.2006
ISO Zusammenstellung
23:04:07	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate        : FALSE
	Write          : TRUE
	Finalize CD       : TRUE
	Multisession      : FALSE
	Burning mode      : DAO
	Mode          : 1
	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
	Character set      : ISO 9660
	Joliet         : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : FALSE
	Write ISO9660 ;1 file extensions    : TRUE
	
23:04:07	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
23:04:07	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
23:04:07	#4 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
23:04:07	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
23:04:07	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
23:04:09	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written:      2288863 (508:38.13, 4470MB)
	
23:04:09	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
23:04:10	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004, Media type: DVD-R
	 Disc Manufacturer: SKC Co - .,Ltd.
	 Disc Application Code: 64, Disc Physical Code: 193
	
23:04:10	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
23:04:10	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2288864 (2288864) = #2288864/508:38.14
	  relocatable, disc pos for caching/writing not required/ required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288864 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
23:04:10	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4687593472, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2288864 | lead-out |  1 |  0x41 | 0x00
	
23:04:10	#13 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
23:04:11	#14 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
23:04:11	#15 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
23:04:11	#16 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
23:04:11	#17 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 4x (5.540 KB/s)
	
23:04:11	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
23:04:12	#19 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
	
23:04:12	#20 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Super Link -> ON 
	
23:04:12	#21 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
23:04:12	#22 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:   0 h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In:   0 h
	 Media Specific [16..63]:
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	
23:04:22	#23 Text 0 File Cdrdrv.cpp, Line 1195
	23:04:22.515 - H: DVDRW IDE1004 : Queue again later
	
23:08:38	#24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:  0x2A 00 00 00 02 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x04e00000: Len x10000
	0x3E 2F FF 7E 2E FA 95 53 65 55 56 68 40 8B B3 3A 
	0x64 15 D4 E8 0A 88 59 70 36 8F B5 44 2F 2E A9 87 
	0xAA AF E2 59 3E 7D 50 1E 06 64 BE 0F 44 AF 74 78 
	
23:08:38	#25 CDR -1135 File Writer.cpp, Line 302
	Write error
	H: DVDRW IDE1004
	
23:08:38	#26 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
23:08:39	#27 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
23:08:40	#28 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 511
	
23:08:40	#29 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======



Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 568MB (581956kB)
Memory in use    : 44 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

7.1.2006
ISO Zusammenstellung
15:45:10	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate        : FALSE
	Write          : TRUE
	Finalize CD       : TRUE
	Multisession      : FALSE
	Burning mode      : DAO
	Mode          : 1
	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
	Character set      : ISO 9660
	Joliet         : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : FALSE
	Write ISO9660 ;1 file extensions    : TRUE
	
15:45:10	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
15:45:10	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
15:45:10	#4 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
15:45:10	#5 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
15:45:10	#6 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
15:50:35	#7 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written:      2288863 (508:38.13, 4470MB)
	
15:50:35	#8 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
15:50:35	#9 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004, Media type: DVD-R
	 Disc Manufacturer: - 
	 Disc Application Code: 0, Disc Physical Code: 0
	
15:50:35	#10 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Disc not writeable. Insert writeable disc.
		(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
	
15:50:35	#11 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2288864 (2288864) = #2288864/508:38.14
	  relocatable, disc pos for caching/writing not required/ required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288864 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
15:50:35	#12 Text 0 File Burncd.cpp, Line 3891
	Kann die aktuelle Disk nur mit 2,4x (3.324 KB/s) anstelle von 4x (5.540 KB/s) beschreiben.
	
15:50:35	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4687593472, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2288864 | lead-out |  1 |  0x41 | 0x00
	
15:50:35	#14 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
15:50:35	#15 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
15:50:36	#16 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
15:50:36	#17 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
15:50:36	#18 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 2,4x (3.324 KB/s)
	
15:50:36	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
15:50:36	#20 Text 0 File DVDR.cpp, Line 2469
	Recording mode: Sequential Recording Mode
	
15:50:36	#21 Text 0 File MMC.cpp, Line 21541
	Set BUFE: Super Link -> ON 
	
15:50:36	#22 Text 0 File DVDR.cpp, Line 2624
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
15:50:36	#23 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:   0 h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In:   0 h
	 Media Specific [16..63]:
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	
15:51:01	#24 Text 0 File Cdrdrv.cpp, Line 1195
	15:51:01.484 - H: DVDRW IDE1004 : Queue again later
	
15:52:18	#25 SPTI -1135 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:  0x2A 00 00 00 02 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x0a4b0000: Len x10000
	0x3E 2F FF 7E 2E FA 95 53 65 55 56 68 40 8B B3 3A 
	0x64 15 D4 E8 0A 88 59 70 36 8F B5 44 2F 2E A9 87 
	0xAA AF E2 59 3E 7D 50 1E 06 64 BE 0F 44 AF 74 78 
	
15:52:18	#26 CDR -1135 File Writer.cpp, Line 302
	Write error
	H: DVDRW IDE1004
	
15:52:18	#27 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
15:52:19	#28 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
15:52:19	#29 Text 0 File DVDR.cpp, Line 2866
	EndDAO: Last written address was 511
	
15:52:19	#30 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 2,4x (3.324 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
  • #4
Code: 
====== *** Nero Burning ROM, History File *** ======



Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 647MB (662892kB)
Memory in use    : 36 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

7.1.2006
ISO Zusammenstellung
15:55:33	#1 Text 0 File Isodoc.cpp, Line 6410
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate        : FALSE
	Write          : TRUE
	Finalize CD       : TRUE
	Multisession      : FALSE
	Burning mode      : DAO
	Mode          : 1
	ISO Level        : 1 (Max. of 11 = 8 + 3 char)
	Character set      : ISO 9660
	Joliet         : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path : FALSE
	Write ISO9660 ;1 file extensions    : TRUE
	
15:55:33	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
15:55:33	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
15:55:33	#4 ISO9660GEN -11 File Geniso.cpp, Line 3304
	First writeable address = 0 (0x00000000)
	
15:55:33	#5 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
15:55:45	#6 Phase 40 File dlgbrnst.cpp, Line 1724
	Aborted by user
	
15:55:45	#7 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
15:55:45	#8 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004
	 Medium not present
	
15:55:45	#9 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unbekannt. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======



Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 

NT-SPTI used
Nero Version: 7.0.0.0
Recorder:       <DVDRW IDE1004>      Version: 0151 - HA 1 TA 0 - 7.0.0.0
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 402MB (412380kB)
Memory in use    : 60 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.1.2006
DVD-Image brennen
17:16:15	#1 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
17:16:15	#2 Text 0 File Reader.cpp, Line 124
	Reader running
	
17:16:15	#3 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
17:16:15	#4 Text 0 File Burncd.cpp, Line 3301
	Turn on Disc-At-Once, using DVD media
	
17:17:03	#5 Text 0 File DlgWaitCD.cpp, Line 277
	Last possible write address on media: 2295103 (510:01.28, 4482MB)
	Last address to be written:      2289577 (508:47.52, 4471MB)
	
17:17:03	#6 Text 0 File DlgWaitCD.cpp, Line 289
	Write in overburning mode: NO (enabled: CD DVD)
	
17:17:03	#7 Text 0 File DlgWaitCD.cpp, Line 2568
	Recorder: DVDRW IDE1004, Media type: DVD+R
	 Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 3
	
17:17:03	#8 Text 0 File DlgWaitCD.cpp, Line 456
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Compilation cannot be written on that medium type.
		(Medium in drive: CD-R. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
	
17:17:03	#9 Text 0 File ThreadedTransferInterface.cpp, Line 846
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2289578 (2289578) = #2289578/508:47.53
	  not relocatable, disc pos for caching/writing not required/not required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289578 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
17:17:03	#10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4689055744, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2289578 | lead-out |  1 |  0x41 | 0x00
	
17:17:03	#11 Text 0 File SCSIPassThrough.cpp, Line 34
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
17:17:04	#12 Phase 24 File dlgbrnst.cpp, Line 1724
	Caching of files started
	
17:17:04	#13 Text 0 File Burncd.cpp, Line 4129
	Cache writing successful.
	
17:17:04	#14 Phase 25 File dlgbrnst.cpp, Line 1724
	Caching of files completed
	
17:17:04	#15 Phase 36 File dlgbrnst.cpp, Line 1724
	Burn process started at 4x (5.540 KB/s)
	
17:17:04	#16 SPTI -1066 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:  0xAD 00 00 00 00 00 00 FF 40 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 
	Buffer x04bb4c00: Len x4000
	
17:17:04	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
17:17:04	#18 Text 0 File Cdrdrv.cpp, Line 8385
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R  (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

	 End Physical Sector Number of Data Area:   26053F h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Disc Application Code: 0 / 0 h
	 Extended Information indicators: 3 h
	 Disc Manufacturer ID: CMC.MAG.
	 Media type ID: E01
	 Product revision number: 0
	 Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	   00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38  ...CMC.MAG.E01.8
	   23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08  #T7..8j..g......
	   01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00  ................
	
17:17:04	#19 SPTI -1066 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:  0xFA 01 00 00 00 00 00 04 00 00 AA FF 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 
	Buffer x003d5200: Len x4
	
17:17:04	#20 Text 0 File DVDPlusRW.cpp, Line 666
	Start write address at LBA 0
	DVD high compatibility mode: No
	
17:31:23	#21 Text 0 File WriterStatus.cpp, Line 116
	<H: DVDRW IDE1004> start writing Lead-Out at LBA 2289578 (22EFAAh), length 0 blocks
	
17:31:23	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
17:32:36	#23 SPTI -1135 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:  0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x03828600: Len x20
	
17:32:36	#24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:  0xFA 01 00 00 00 00 00 04 00 00 AA FF 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 
	Buffer x003d5200: Len x4
	
17:32:36	#25 CDR -1135 File ThreadedTransferInterface.cpp, Line 1921
	Write error
	H: DVDRW IDE1004
	
17:32:36	#26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1921
	Could not perform end of Disc-at-once
	
17:33:44	#27 SPTI -1135 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key: 0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:  0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x03828600: Len x20
	
17:33:44	#28 Phase 127 File dlgbrnst.cpp, Line 1724
	Generating DVD high compatibility borders
	
17:33:44	#29 Phase 129 File dlgbrnst.cpp, Line 1724
	Generating DVD borders completed successfully
	
17:33:44	#30 SPTI -1066 File SCSIPassThrough.cpp, Line 306
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:  0xFA 01 00 00 00 00 00 04 00 00 AA FF 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 
	Buffer x003d5200: Len x4
	
17:33:44	#31 Phase 38 File dlgbrnst.cpp, Line 1724
	Burn process failed at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======

Code:
 
  • #6
Wenn ich mir das Log so anschaue, ist dringend ein Firmwareupdate fällig. Die Software dazu lag deinem Brenner bei.
 
  • #7
ok werd mal nero und firmware auf neusten stand bringen und dann hier meine ergebnisse präsentieren
hab mal n bisschen geforscht der brenner hat bei manchen schon bei der 2ten dvd versagt^^

@ flocke: des mitm updaten is leicht gesagt...
wenn man nämlich Zuhause von der Telekom keine DSL Leitung bekommt dauern die 104MB des Updates ziehen sehr sehr lange mit isdn :(
 
  • #9
danke schwimmi
firmware is jetzt auf dem neusten stand, ich werd mal nero updaten bevor ich einen weiteren rohling riskier
 
  • #10
Kein Problem. Die Dinger werden sehr oft geupdatet. Im Bekanntenkreis sind einige die viel brennen und dann Rohlingprobleme haben.
 
  • #11
Blood_in_the_rain schrieb:
@ flocke: des mitm updaten is leicht gesagt...
wenn man nämlich Zuhause von der Telekom keine DSL Leitung bekommt dauern die 104MB des Updates ziehen sehr sehr lange mit isdn :(
Zum Vergrößern anklicken....
Du wirst doch jemanden mit DSL im Bekanntenkreis haben, der dir das eben saugen könnte, oder?
Also Version 7.0.0.0 ist halt megabuggy, wie ich selber erfahren durfte und deswegen habe ich diese Version auch ganz schnell wieder vom Rechner verbannt.
 
  • #12
ja schon :D aber die lachen mich sowieso schon alle aus, dass ich noch so große sachen mit ISDN saug :'(
jehh hab schon ganze 55% :-\
 
  • #13
Blood_in_the_rain schrieb:
ja schon :D aber die lachen mich sowieso schon alle aus, dass ich noch so große sachen mit ISDN saug  :'(
jehh hab schon ganze 55%  :-\
Zum Vergrößern anklicken....
Fragen kostet nix oder? Wenn ich kein DSL hätte, sollen sie doch lachen. Die 107 MB bekomme ich schon ;)
 
  • #14
es dauert...
 
  • #16
Juhhhuuuu Firmware und Nero Update zeigen Erflog.
Er mag wieder hoffe es bleibt wo.
Vielen Dank Schwimmi und Flocke ihr seid die beseten :eek:

Code: 
Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24 
ahead WinASPI: File->D:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32 

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:       <DVDRW IDE1004>      Version: 0251 - HA 1 TA 0 - 7.0.1.4
 Adapter driver:   <IDE>           HA 1
 Drive buffer :   2048kB
 Bus Type   :   default (0) -> ATAPI, detected: ?
CD-ROM:        <SCSIVAX DVD/CD-ROM   >Version: 2.7a - HA 1 TA 1 - 7.0.1.4
 Adapter driver:   <SCSI>          HA 1

=== Scsi-Device-Map ===
CdRomPeripheral   : DVDRW IDE1004          atapi Port 0 ID 1 DMA: On 
DiskPeripheral    : ST3120023AS       3.01  si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral   : SCSIVAX DVD/CD-ROM   2.7a  Vax347s Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
DVDRW IDE1004       H:  CDRom0
SCSIVAX DVD/CD-ROM     I:  CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE      : 0
Physical memory   : 1023MB (1048048kB)
Free physical memory: 587MB (601772kB)
Memory in use    : 42 
Uncached PFiles: 0x0
Use Inquiry  : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

21.1.2006
DVD-Image brennen
14:10:27	#1 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 81920KB of Memory
	
14:10:27	#2 Text 0 File Reader.cpp, Line 124
	Reader running
	
14:10:27	#3 Text 0 File Writer.cpp, Line 113
	Writer H: DVDRW IDE1004 running
	
14:10:27	#4 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
14:10:59	#5 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media: 2298495 (510:46.45, 4489MB)
	Last address to be written:      2289577 (508:47.52, 4471MB)
	
14:10:59	#6 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD DVD)
	
14:10:59	#7 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: DVDRW IDE1004, Media type: DVD-R
	 Disc Manufacturer: SKC Co - .,Ltd.
	 Disc Application Code: 64, Disc Physical Code: 193
	
14:10:59	#8 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unbekannt. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
	
14:10:59	#9 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
	  2 indices, index0 (150) not provided
	  original disc pos #0 + 2289578 (2289578) = #2289578/508:47.53
	  not relocatable, disc pos for caching/writing not required/not required, no patch infos
	  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289578 blocks [H: DVDRW IDE1004]
	--------------------------------------------------------------
	
14:11:00	#10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: 
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	  1: TRM_DATA_MODE1, 2048/0x00, FilePos       0       0  4689055744, ISRC 
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    0 | lead-in |  0 |  0x41 | 0x00
	    0 |    1 |  0 |  0x41 | 0x00
	    0 |    1 |  1 |  0x41 | 0x00
	 2289578 | lead-out |  1 |  0x41 | 0x00
	
14:11:00	#11 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
14:11:00	#12 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
14:11:00	#13 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
14:11:00	#14 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
14:11:00	#15 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 4x (5.540 KB/s)
	
14:11:01	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
14:11:02	#17 Text 0 File DVDR.cpp, Line 2580
	Recording mode: Sequential Recording Mode
	
14:11:02	#18 Text 0 File MMC.cpp, Line 21611
	Set BUFE: Super Link -> ON 
	
14:11:02	#19 Text 0 File DVDR.cpp, Line 2735
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
14:11:02	#20 Text 0 File Cdrdrv.cpp, Line 8411
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R  (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,   Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,  Track Path: Parallel Track Path (PTP), Layer Type: recordable
	 Linear Density:     0,267 um/bit, Track Density: 0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:   0 h
	 End Sector Number in Layer 0:         0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Start sector number of the current Border-Out: 0 h
	 Start sector number of the next Border-In:   0 h
	 Media Specific [16..63]:
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	   00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  ................
	
14:11:20	#21 Text 0 File Cdrdrv.cpp, Line 1197
	14:11:20.312 - H: DVDRW IDE1004 : Queue again later
	
14:39:34	#22 Text 0 File WriterStatus.cpp, Line 116
	<H: DVDRW IDE1004> start writing Lead-Out at LBA 2289578 (22EFAAh), length 0 blocks
	
14:39:34	#23 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
14:39:34	#24 Text 0 File DVDR.cpp, Line 2978
	EndDAO: Last written address was 2289567
	
14:39:46	#25 Phase 37 File dlgbrnst.cpp, Line 1725
	Burn process completed successfully at 4x (5.540 KB/s)
	

Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46 
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero Burning ROM, History File *** ======
 
  • #17
Na dann viel Spaß noch und gerne wieder ;)
 
Thema:

BTC DVDRW IDE 1004 defekt? Brauch Hilfe Bitte

ANGEBOTE & SPONSOREN

Neueste Themen

Statistik des Forums

Themen
113.840
Beiträge
707.963
Mitglieder
51.494
Neuestes Mitglied
Flensburg45
Oben