- #1
B
Blood_in_the_rain
Bekanntes Mitglied
Themenersteller
- Dabei seit
- 29.05.2002
- Beiträge
- 145
- Reaktionspunkte
- 0
- Ort
- Da wo's kein DSL gibt
Hallo liebe WT Community
hab ein Problem mit meinem Brenner. Und zwar seit 2 Wochen schaftt ers nicht mehr DVD zu brennen. Entweder er scheitert beim Lead in oder beim Lead out. Da ich mich nicht besonders mit der Materie aus kenne und nicht weis an was das leigen könnte schreib ich hier den Nero Log sowohl als er noch lief, sowie danach oben 2.01.06 lief noch
unten heute.
schon 5 DVD Rohlinge vebrannt. Bitte helft mir oder sagt mir ob ich nen neuen Brenner kaufen muss:
hab ein Problem mit meinem Brenner. Und zwar seit 2 Wochen schaftt ers nicht mehr DVD zu brennen. Entweder er scheitert beim Lead in oder beim Lead out. Da ich mich nicht besonders mit der Materie aus kenne und nicht weis an was das leigen könnte schreib ich hier den Nero Log sowohl als er noch lief, sowie danach oben 2.01.06 lief noch
unten heute.
schon 5 DVD Rohlinge vebrannt. Bitte helft mir oder sagt mir ob ich nen neuen Brenner kaufen muss:
Code:
Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <DVDRW IDE1004> Version: 0151 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW IDE1004 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3120023AS 3.01 si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 H: CDRom0
SCSIVAX DVD/CD-ROM I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 614MB (629620kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
UDF Zusammenstellung
13:02:36 #1 Text 0 File WriterStatus.cpp, Line 116
<H: DVDRW IDE1004> start writing Lead-Out at LBA 2272752 (22ADF0h), length 0 blocks
13:02:37 #2 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:02:37 #3 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2272751
13:03:15 #4 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 4x (5.540 KB/s)
Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <DVDRW IDE1004> Version: 0151 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW IDE1004 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3120023AS 3.01 si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 H: CDRom0
SCSIVAX DVD/CD-ROM I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 598MB (612772kB)
Memory in use : 41
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
ISO Zusammenstellung
13:57:56 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
13:57:56 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
13:57:56 #3 Text 0 File Reader.cpp, Line 124
Reader running
13:57:56 #4 Text 0 File Writer.cpp, Line 113
Writer H: DVDRW IDE1004 running
13:57:56 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
13:57:56 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
13:57:59 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2215791 (492:23.66, 4327MB)
13:57:59 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
13:57:59 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
13:57:59 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:57:59 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2215792 (2215792) = #2215792/492:23.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2215792 blocks [H: DVDRW IDE1004]
--------------------------------------------------------------
13:58:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN:
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4537942016, ISRC
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2215792 | lead-out | 1 | 0x41 | 0x00
13:58:00 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
13:58:00 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
13:58:00 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
13:58:00 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
13:58:01 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5.540 KB/s)
13:58:01 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:58:02 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
13:58:02 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON
13:58:02 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
13:58:02 #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:58:13 #23 Text 0 File Cdrdrv.cpp, Line 1195
13:58:13.250 - H: DVDRW IDE1004 : Queue again later
14:25:32 #24 Text 0 File WriterStatus.cpp, Line 116
<H: DVDRW IDE1004> start writing Lead-Out at LBA 2215792 (21CF70h), length 0 blocks
14:25:32 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
14:25:32 #26 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2215791
14:26:10 #27 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 4x (5.540 KB/s)
Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <DVDRW IDE1004> Version: 0151 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW IDE1004 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3120023AS 3.01 si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 H: CDRom0
SCSIVAX DVD/CD-ROM I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 425MB (436048kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2006
ISO Zusammenstellung
20:38:51 #1 Text 0 File WriterStatus.cpp, Line 116
<H: DVDRW IDE1004> start writing Lead-Out at LBA 2219056 (21DC30h), length 0 blocks
20:38:51 #2 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:38:51 #3 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2219055
20:39:33 #4 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 4x (5.540 KB/s)
Existing drivers:
File->Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 02:02:46
File->Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11.03.2005 23:28:13 (Prassi/Veritas driver for win 2K)
File->Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: File->Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 01:23:24
ahead WinASPI: File->D:\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <DVDRW IDE1004> Version: 0151 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW IDE1004 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3120023AS 3.01 si3112r Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 H: CDRom0
SCSIVAX DVD/CD-ROM I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 442MB (453092kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2006
ISO Zusammenstellung
22:42:08 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
22:42:08 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
22:42:08 #3 Text 0 File Reader.cpp, Line 124
Reader running
22:42:08 #4 Text 0 File Writer.cpp, Line 113
Writer H: DVDRW IDE1004 running
22:42:08 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
22:42:08 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
22:42:11 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2288863 (508:38.13, 4470MB)
22:42:11 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
22:42:11 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
22:42:11 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:42:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2288864 (2288864) = #2288864/508:38.14
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288864 blocks [H: DVDRW IDE1004]
--------------------------------------------------------------
22:42:11 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [H: DVDRW IDE1004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN:
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4687593472, ISRC
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2288864 | lead-out | 1 | 0x41 | 0x00
22:42:11 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
22:42:11 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
22:42:12 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
22:42:12 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
22:42:12 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5.540 KB/s)
22:42:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:42:13 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
22:42:13 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON
22:42:13 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes