So, folgende lustige Probleme taten sich soeben auf als ich die Tipps von Sven anwenden wollte:
boaaaah, jetzt bin ich Schuld..... ;-)
a) Folgende Fehlermeldung kam nachdem ich versuchte meinen USB MP3 Player (der sich als USB Storage am System ausweist) anzuschalten. Hotplug hat da wohl ein Problem.
[mntent]: warning: no final newline at the end of /etc/fstab
mount: I could not determine the filesystem type, and none was specified
Please check that the disk is entered correctly.
Editiere die /etc/fstab und drück am Ende der Datei einmal Enter (und abspeichern)
b) Folgende Fehlermeldung kommt wenn ich versuche meine beiden IDE Parttionen (mit NTFS) versuche anzusprechen:
Ordner /media/ide0 lässt sich nicht öffnen
machst du das als root oder als user ?
ntfs Modul ist geladen, sieht also gut aus...
probier mal (als root)
mount -o remount /media/ide0
und dann ls -la /media/ide0
(wenn's tut, dann stimmt was mit den Rechten nicht)
c) Das passierte nachdem ich den alsamixer ausgeführt habe:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such file or directory)
The sound server will continue, using the null output device.
beim ausführen von alsaconf kommt folgende Fehlermeldung am Ende nach dem einbinden der Soundkarte.
Running update-modules...
Loading driver...
Setting default volumes...
Saving the mixer setup used for this in /var/lib/alsa/asound.state.
/usr/sbin/alsactl: save_state:1194: No soundcards found...
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
Soundmodule sind alle geladen... Prima...
/etc/init.d/alsa(sound) stop
DANACH alsaconf aufrufen
(hin und wieder auf der Debian Mailingliste diskutiert... nach alsaconf einmal alsactl store aufrufen und rebooten)
Meine fstab sieht so aus:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda1 / ext3 defaults,errors=remount-ro 0 1
/dev/sda9 /home ext3 defaults 0 2
/dev/sda8 /tmp ext3 defaults 0 2
/dev/sda5 /usr ext3 defaults 0 2
/dev/sda6 /var ext3 defaults 0 2
/dev/sda7 none swap sw 0 0
/dev/hdd /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/hdc /media/cdrom1 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/dev/hda1 /media/ide0 ntfs defaults,user 0 2
/dev/hda2 /media/ide1 ntfs defaults,user 0 2
/dev/sdb1 /media/scsi1 ext3 defaults,user 0 2
Die zweite SCSI Platte lässt sich OHNE Probleme öffnen und beschreiben!!!
sieht gut aus...
Mein Mainboard ist ein Chaintech 7VJL1 die Soundkarte ist die dazugehörige ON Board Karte von VIA. Ich habe (immer noch) den 2.6.8er Kernel installiert!
das deckt sich ja auch mit den geladenen Modulen...
Via 82xxx Chipsatz, etc...
Hat jemand eine Idee was ich noch versuchen könnte?
Nach eingabe von lsmod | grep usbstorage erscheint KEINE weitere Bildschirmmeldung, ich lande wieder auf der Konsole.
sorry... musste natürlich usb_storage heissen, was aber geladen wird...
Ach bevor ich es vergesse, hier die Meldung von lsmod
Module Size Used by
usb_storage 59072 0
ipv6 229764 8
af_packet 20872 2
snd_via82xx 26660 0
snd_ac97_codec 59268 1 snd_via82xx
snd_pcm 85384 1 snd_via82xx
snd_timer 23172 1 snd_pcm
snd_page_alloc 11144 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7296 1 snd_via82xx
snd_rawmidi 23204 1 snd_mpu401_uart
snd_seq_device 7944 1 snd_rawmidi
snd 50660 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
pci_hotplug 30640 0
via_agp 8832 1
agpgart 31784 1 via_agp
analog 10784 0
gameport 4736 2 snd_via82xx,analog
parport_pc 31936 0
parport 37320 1 parport_pc
floppy 54992 0
tsdev 7168 0
mousedev 9996 2
psmouse 17800 0
pcspkr 3816 0
rtc 12088 0
evdev 9088 0
ehci_hcd 27908 0
uhci_hcd 29328 0
usbcore 104164 5 usb_storage,ehci_hcd,uhci_hcd
soundcore 9824 1 snd
via82cxxx 12956 1
via_rhine 19720 0
mii 4864 1 via_rhine
crc32 4608 1 via_rhine
via_ircc 20368 0
irda 167360 1 via_ircc
crc_ccitt 2432 1 irda
nls_cp437 6016 2
ide_disk 16768 3
ntfs 88660 2
capability 4872 0
commoncap 7168 1 capability
ide_generic 1664 0
ide_cd 38176 0
ide_core 125156 5 usb_storage,via82cxxx,ide_disk,ide_generic,ide_cd
cdrom 35740 1 ide_cd
ext3 109544 6
jbd 54552 1 ext3
sd_mod 20480 9
aic7xxx 181336 7
scsi_mod 115148 3 usb_storage,sd_mod,aic7xxx
unix 25908 231
font 8576 0
vesafb 6688 0
cfbcopyarea 3840 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb
und mount
/dev/sda1 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sda9 on /home type ext3 (rw)
/dev/sda8 on /tmp type ext3 (rw)
/dev/sda5 on /usr type ext3 (rw)
/dev/sda6 on /var type ext3 (rw)
/dev/hda1 on /media/ide0 type ntfs (ro,noexec,nosuid,nodev)
/dev/hda2 on /media/ide1 type ntfs (ro,noexec,nosuid,nodev)
/dev/sdb1 on /media/scsi1 type ext3 (ro,noexec,nosuid,nodev)
usbfs on /proc/bus/usb type usbfs (rw)
passt doch ansich...
usbfs wird auch geladen...
Hmmmm.... falls es nicht klappen sollte, könnt ich mir das gerne mal anschauen - wennde magst...
Gruß
Sven